Content with quality

21 August 2015
Please find below documents as a part of our Technical Support section. If case of any further questions, please visit our Frequently Asked Questions (FAQ) section or contact with Andrews Fasteners Quality Department . BS EN 15048 Non-preloaded structural bolting assemblies (SB) Torque values prepared by W. Christie Guidance On The Tightening of Non-preloaded Fasteners Guide to Design Criteria for Bolted and Riveted Joints, Second Edition BS EN 14399 High-strength structural bolting assemblies for preloading (HR) BS EN 14399 (HR) Configurator Torque values for preload bolt assemblies with specified k-Class Bolt Length Calculator for HR Bolts and HR Countersunk Bolts (EN 14399-3/7) Thread Length (HR CSK) Calculator for bolts EN 14399-7 Thread Length (HR) Calculator for bolts EN 14399-3 Comparison of Tightening Methods of HSFG Bolts Detailed comparison of BS 4395 and BS EN 14399-3 & 6 Summary comparison of BS 4395 and BS EN 14399-3 & 6 Grip, Bolt Lengths and Hole Dimensions Guidance notes on the use of Preload Bolt Assemblies BS EN 14399 (HSFG) comparison as an alternative to ASTM HSFG See also: Preloaded assemblies k-Class K1 and K2 manufactured in the UK (from News ) BS EN 14399-9 Direct Tension Indicators Washers Instruction Manual for installing Preloaded (HSFG) bolting with TurnaSure Direct Tension Indicators Washers EN 14399-9 New Generation Direct Tension Indicators Squirter Type DTI performance results Preload Measurement and Comparison of Structural Bolts sets installed in Steel Connections with and without DTI Tests for stress relaxation over time 1963 to 1971 with CLI Fatigue tests on CLI CLI Washers-load gap relationship on unloading and loading DTI Case History - DTIs Save More than $150,000 Study discussing influence of load-indicating washers on bolt relaxation in joints subject to high prying forces Study on full flattening of Direct Tension Indicators in Shear Connections Study on curved protrusion DTIs design assembled without needing nut face or bolt face washers Impact of Variable Lubricity on Type 325 Structural DTIs Test Report for Accelerated Aging of Weathering Steel Joint using TurnaSure Weathering Steel Transverse Vibration Loosening Characteristics of High Strength Fastened Joints using DTIs Coating Trivalent passivation systems (Fasteners+Fixings Magaizne) The HDG (Hot Dip Galvanising) Coating (Source: galvanizeit.
Read more about Technical Support

24 January 2015
Andrews Fasteners Limited ISO 9001:2015 and National Highway Sector Scheme No 3 BIAFD - Executive Member ISO 9001:2015, NHSS3 (2021-2024) BIAFD Executive Member 2021-2022 Andrews Fasteners ISO 9001:2015 (QMS) & NHSS3 Certificate Expiry date 03/03/2024 BIAFD Certificate of Membership Andrews Fasteners (Executive Member) Expiry date 30/06/2022 UKCA approval (from 1st January 2021) FPC/UKCA EN 15048-1:2007 (UK) FPC/UKCA EN 14399-1:2015 (UK) Andrews Fasteners Limited EN 15048-1:2007 UKCA (0038 UK) FPC Approval Certificate (CPR) Expiry date 26/04/2024 Andrews Fasteners Limited EN 14399-1:2015 UKCA (0038 UK) FPC Approval Certificate (CPR) Expiry date 26/04/2024 CE approval (from 1st January 2021) FPC/CE EN 15048-1:2007 (EU) FPC/CE EN 14399-1:2015 (EU) Andrews Fasteners Limited EN 15048-1:2007 CE (2814 EU) FPC Approval Certificate (CPR) Expiry date 26/04/2024 Andrews Fasteners Limited EN 14399-1:2015 CE (2814 EU) FPC Approval Certificate (CPR) Expiry date 26/04/2024 CE approval (until 31st December 2020) FPC/CE EN 15048-1:2007 (UK) FPC/CE EN 14399-1:2015 (UK) Andrews Fasteners Limited EN 15048-1:2007 CE FPC Approval Certificate (CPR) Andrews Fasteners Limited EN 14399-1:2015 CE FPC Approval Certificate (CPR) Other quality documents Andrews Fasteners Quality Policy and Mission Statement Andrews Fasteners In-house Inspection & Testing Equipment Guide Declaration of Performance (DOP)
Read more about Certificates and Approvals

24 January 2015
Sales Andrews Fasteners Terms and Conditions Of Sale INCOTERMS 2015 – Rules (IFE Global Logistics) Purchase Andrews Fasteners Terms & Conditions Of Purchase Accounts Credit Account Application Currency Converter that we using (via Wise) Quality Certificates and Approvals Declarations of Performance Technical Support Extracts from Standards Frequently Asked Questions (FAQ) Health and Safety Company Health and Safety documents: Andrews Fasteners Health & Safety Policy Statement Control of Substances Hazardous to Health (COSHH) documents: Epoxy Acrylate Polyester Vinylester R-CAS R-HAC R-KEA R-KEM R-KEX R-KF2 R-KSF Environmental Andrews Fasteners Sustainability Policy Andrews Fasteners Environmental Policy Statement Andrews Fasteners Limited – REACH Compliance The Recycled Content Of Steel Products (BCSA Memorandum 233-10) Sustainable Steel Construction (BCSA / Corus) Sustainable Steel Construction (Flyer) (BCSA / Corus) The Case for Steel (BCSA / Corus) Recycled content of steel (BCSA) Brochures & Others Andrews Fasteners Brochure Andrews Fasteners In-house Inspection & Testing Equipment Guide Andrews Fasteners Railway Track Fasteners Leaflet Andrews Fasteners: Colour Coded System Overview of the steelmaking process chart Anti-bribery and Corruption Policy inc.
Read more about Documents

21 August 2014
Andrews Fasteners innovating Stockists and Distributors of Industrial Fasteners Andrews Fastener have revolutionised how bolts are packed, presented and delivered to Construction Companies UK and Worldwide. Now our innovations are changing other industries. Recyclable Bags and Labels Both, our bags, and labels are fully recyclable. Colour coded bags for fastener diameter identification Colour denotes bolt diameters Easily identifiable on site Health & Safety benefits (Design Best Practice) Saves time on site!
Read more about Innovations

21 August 2014
Andrews Fasteners Quality Andrews Fasteners operate a fully controlled quality system maintaining traceability of products from their initial source of supply, into stock, directly through to dispatch to the customer. Andrews Fasteners quality system is registered under BS EN ISO 9001 and NHSS3 (National Highway Sector Scheme 3) and has been assessed by Lloyd’s Register Quality Assurance UK LRQA . Our company also hold UKCA & CE approval for the supply of preload (BS EN 14399) and non-preload (BS EN 15048) fasteners.
Read more about Quality

19 August 2014
Andrews Fasteners Limited The Fasteners Specialist Andrews Fasteners supply quality assured CE & UKCA approved and other fasteners to various industries at competitive prices. Andrews Fasteners reputation for quality assured products and service is the foundation on which the company stands. Our quality systems are independently assessed, certified and approved to BS EN ISO 9001:2015 NHSS3 (National Highway Sector Scheme 3) CPR (Construction Product Regulation) for:
Read more about Andrews Fasteners Limited

15 April 2007
To ensure products received are manufactured correctly we have invested in a wide range of inspection equipment. Inspections are completed on all products ranging from dimensional checks to destructive testing. Read more: Andrews Fasteners In-house Inspection & Testing Equipment Guide
Read more about Investition into inspection equipment