Content with Nuts

08 February 2022
It is the requirement that the manufacturer of the EN 14399 assembly will supply them suitably lubricated. The lubrication can be applied either on the bolt thread (external) or the nut thread (internal). Andrews Fasteners, in a majority of cases, choose to apply lubrication on the internal thread of the nuts. Due to the method used to lubricate the nuts, typically they need to be immersed in lubricant in full. Depending on the type of process used, the appearance of the nuts can differ, especially on Hot Dip Galvanised (HDG) nuts.
Read more about The different appearance of lubricated nuts on EN 14399 assemblies

23 July 2018
T-Head bolts and nuts assembly Tee-Head bolts and hexagonal nuts in use for Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings Andrews Fasteners Limited together with its partnership factory, manufacturing and distributing T-Head bolts and nuts assemblies for use within the waterworks industry worldwide. We specialise in T-Head bolts in an exclusive range of sizes and finishes. Direct from the factory to the United States of America and Canada, we supply a minimum of 30 full containers of these products to our customers.
Read more about T-Head bolts and nuts assembly

23 July 2018
Dimensions of T-head (tee-head) bolt and nut Size in. A ±0,05 B +0,030 -0,074 C +0,25 -0,05 D* +3 -0 F H +0,00 –(as spec.) J +0,15 -0,03 R max. ⅝ x 3 1,50 0,625 3,0 2,00 0,625±0,04 1,062 -0,04 0,625 0,312 ¾ x 3½ 1,75 0,750 3,5 2,50 0,750±0,06 1,250 -0,06 0,750 0,375 ¾ x 4 1,75 0,750 4,0 3,00 0,750±0,06 1,250 -0,06 0,750 0,375 ¾ x 4½ 1,75 0,750 4,5 3,00 0,750±0,06 1,250 -0,06 0,750 0,375 ¾ x 5 1,75 0,750 5,0 3,00 0,750±0,06 1,250 -0,06 0,750 0,375 1 x 5½ 2,25 1,000 5,5 3,00 1,000±0,08 1,625 -0,08 1,000 0,500 1 x 6 2,25 1,000 6,0 3,00 1,000±0,08 1,625 -0,08 1,000 0,500 1¼ x 6 2,50 1,250 6,0 3,50 1,250±0,08 2,000 -0,08 1,250 0,625 1¼ x 6½ 2,50 1,250 6,5 3,5 1,250±0,08 2,000 -0,08 1,250 0,625 *) Bolts with dimension C longer than listed above are assumed to use the same thread length requirements as the longest specified.
Read more about Technical specification for T-head bolts (ANSI/AWWA C111/A21.11)

30 November 2015
We are offering wide range of Nuts (ISO, DIN and other standards) to various grades and finishes – washers from plain to special type of washers and springs. Our offer includes Product description Specification Availability Hexagon Full Nut, Structural nut, High Nuts, UNC Nuts ISO 4032 DIN 934 DIN 6915 DIN 555 DIN 934 BS 3692 BS EN 14399-3 Buy Online Hexagon Jam Nut, Lock nut, Half Nut, Thin Nut , Left hand thread nuts DIN 936 DIN 439
Read more about Nuts, Washers, Springs and other components

18 March 2015
Chemical composition as per ISO 898-2 for typical grades Class Material and Treatment C max. Mn min. P max. S max. 8 (M16 and below) carbon steel (may be quenched and tempered) 0.58 0.25 0.060 0.150 8 (above <16) carbon steel quenched and tempered 0.58 0.30 0.048 0.058 10 carbon steel quenched and tempered 0.58 0.30 0.048 0.058 12 carbon steel quenched and tempered 0.
Read more about ISO 898-2 Carbon Steel and Alloy Steel - Nuts

25 August 2014
Construction fasteners products manufactured, supplied and distributed by Andrews Fasteners. As a fasteners specialist Andrews Fasteners can offer various fasteners and fixings starting from most popular up to more complicated and custom made requirements as per drawings. Our products range: BS EN 15048 Non-preloaded structural bolting assemblies (CE & UKCA Marked) Structural bolting (SB) assemblies, hexagon set screws (fully threaded), bolts (part-threaded), hexagon nuts, plain washers available in Self-Colour, Zinc Plated, Galvanised, Sherardized and other finishes.
Read more about Products

21 August 2014
CE Mark CE Marking is a mark affixed by the manufacturer who declares that its product meets the essential requirements for relevant European Regulations. For fasteners, it is Construction Products Regulation (CPR), that become mandatory law in all EU member states including the UK and RoI from the 1st of July 2013. This document is the base for CE marking of fasteners. This European regulation replaced the Construction Products Directive (CPD) and affects all construction products covered by a harmonised standard or ETA (European Technical Assessment) .
Read more about CE & UKCA Marking - CE & UKCA Marked Fasteners

21 August 2014
Railway Track Fasteners Railway fasteners are a product group that Andrews Fasteners have specialized in for many years. To ensure that all fasteners are produced to our high standards, only Approved and ISO Certified manufacturers are used. All goods are produced to strict Andrews Fasteners Quality Control and Inspection Plans, with specially designed inspection equipment. Andrews Fasteners Inspectors are located permanently at the manufacturing factories to ensure the quality. Products can be supplied direct world wide from our partnering factory (after a full Quality Inspection has been conducted by an Andrews Fasteners Inspector) or supplied through Andrews Fasteners Limited located in United Kingdom.
Read more about Railway products

19 August 2014
Please complete Andrews Fasteners online enquiry form below. If you have any comments about Andrews Fasteners Limited or our website please complete our contact form . Please note that by completing and sending the form below you agree to Andrews Fasteners Limited to use and share your details throughout its companies for marketing and other business related purposes. Your details will not be passed on to any third parties without your prior written consent.
Read more about Enquiry Form

19 August 2014
Andrews Fasteners Limited The Fasteners Specialist Andrews Fasteners supply quality assured CE & UKCA approved and other fasteners to various industries at competitive prices. Andrews Fasteners reputation for quality assured products and service is the foundation on which the company stands. Our quality systems are independently assessed, certified and approved to BS EN ISO 9001:2015 NHSS3 (National Highway Sector Scheme 3) CPR (Construction Product Regulation) for:
Read more about Andrews Fasteners Limited