BS EN 14399 Part 5: Plain Washer
| Mechanical Properties | Requirement |
|---|---|
| Vickers hardness | 300 HV to 370 HV |
BS EN 14399-5: High-strength structural bolting assemblies for preloading. Plain washers
BS EN 14399 Part 6: Plain Chamfered Washer
| Mechanical Properties | Requirement |
|---|---|
| Vickers hardness | 300 HV to 370 HV |
BS EN 14399-6: High-strength structural bolting assemblies for preloading. Plain chamfered washers
BS EN 14399 Part 9: Nut Face Washer / Bolt Face Washer
| Mechanical Properties | Requirement |
|---|---|
| heat treatment | hardened and tempered |
| Rockwell hardness | 38 HRC to 45 HRC |
| Vickers hardness | 372 HV30 to 448 HV30 |
BS EN 14399-9: High strength structural bolting for preloading. System HR or HV. Direct tension indicators for bolt and nut assemblies
BS EN 14399 Part 9: Direct Tension Indicators (DTI)
| Mechanical Properties | Requirement |
|---|---|
| Heat treatment | hardened and tempered or controlled rolled and tempered |
| Maximum hardness | 380 HV (~38.8 HRC) |
BS EN 14399-9: High strength structural bolting for preloading. System HR or HV. Direct tension indicators for bolt and nut assemblies
Washers to be used with BS EN 14399 High-strength structural bolting assemblies for preloading . System HR or HV.
↫ Go backWhilst the information is provided in good faith, Andrews Fasteners Ltd are not under any responsibility or liability in respect of errors or information that was found to be incorrect or for any reliance the user may place on it.