BS EN 14399 High-strength structural bolting assemblies for preloading
- What is the difference between Clamp length and Grip length in EN 14399 assemblies?
- What is the difference between preloaded and non-preloaded bolting assemblies?
- Do I need Bolt Face Washer or Nut Face Washer (EN 14399-9) with DTI's?
- Can high-strength structural bolting assemblies for preloading (HSFG) be used on painted or galvanised surfaces?
- What is the minimum thread length on high-strength structural bolting assemblies for preloading?
- Which identification mark is used by Andrews Fasteners?
- What is DOP?
- Are two threads protruding through high-strength structural bolting assemblies for preloading enough?
- Can high-strength structural bolting assemblies for preloading (HSFG) be de-assembled once they have been assembled?
- Should higher-grade nuts be specified for use with galvanized or sherardized set screws and bolts on CE (UKCA) approved assemblies?
- What does the HR & HV symbols mean?
- What is the Difference Between HR and HV Bolt Assemblies?
- Should high-strength structural bolting assemblies for preloading be assembled with lubrication?
- What type of products can be CE (UKCA) marked?
BS EN 15048 Non-preloaded structural bolting assemblies
- What is the difference between preloaded and non-preloaded bolting assemblies?
- Tightening of non-preloaded structural bolting assemblies
- Which identification mark is used by Andrews Fasteners?
- What is DOP?
- Should higher-grade nuts be specified for use with galvanized or sherardized set screws and bolts on CE (UKCA) approved assemblies?
- Can product to DIN standard be CE (UKCA) Marked?
- What type of products can be CE (UKCA) marked?
CE & UKCA Marking
- Can holding down bolts (foundation bolts) be CE (UKCA) marked?
- What is DOP?
- Should higher-grade nuts be specified for use with galvanized or sherardized set screws and bolts on CE (UKCA) approved assemblies?
- Can bags be split and then re-labelled as CE (UKCA) approved?
- Do bags/boxes have to have CE (UKCA) labels on them?
- Can product to DIN standard be CE (UKCA) Marked?
- What type of products can be CE (UKCA) marked?
Coating
- Can high-strength structural bolting assemblies for preloading (HSFG) be used on painted or galvanised surfaces?
- Why does galvanizing coating look different?
- What is the lifetime of galvanising coating?
Installation
- What is the difference between Clamp length and Grip length in EN 14399 assemblies?
- What is the difference between preloaded and non-preloaded bolting assemblies?
- Do I need Bolt Face Washer or Nut Face Washer (EN 14399-9) with DTI's?
- What is a single lap joint according to EN 1993-1-8:2005, 3.6.1.?
Packing
- Which identification mark is used by Andrews Fasteners?
- Can bags be split and then re-labelled as CE (UKCA) approved?
- Do bags/boxes have to have CE (UKCA) labels on them?
Steel
- What is the difference between J2 and JR? Can they be used as substitutes for each other?
- What does the term "Secondary Steelwork" mean?
- Is steel construction sustainable?
- Is steel recyclable?
Test Certificates
- Can Andrews Fasteners send me a Test Certificate for the goods that I purchased?
- Can Andrews Fasteners offer 3.2 certifications?
- Why is there no elongation, impact, reduction of the area on some of the Test Certificates?
If your queries have not been answered, please contact Andrews Fasteners Quality Department and we will try to help.
Shortlink: afast.uk/faq