Please find below documents as a part of our Technical Support section. If case of any further questions, please visit our Frequently Asked Questions (FAQ) section or contact with Andrews Fasteners Quality Department.
BS EN 15048 Non-preloaded structural bolting assemblies (SB)
- Torque values prepared by W. Christie
- Guidance On The Tightening of Non-preloaded Fasteners
- Guide to Design Criteria for Bolted and Riveted Joints, Second Edition
BS EN 14399 High-strength structural bolting assemblies for preloading (System HR and HV)
- The different appearance of lubricated nuts on EN 14399 assemblies
- BS EN 14399 High-Strength Structural Bolting Assemblies for Preload Configurator (HR)
- Torque values for High-Strength Structural Bolting Assemblies for Preloading with specified k-Class
- Bolt Length Calculator for HR Bolts and HR Countersunk Bolts (EN 14399-3/7)
- Thread Length Calculator for Countersunk High-Strength Structural Bolts to BS EN 14399-7 (HR CSK)
- Thread Length Calculator for Hexagon High-Strength Structural Bolts to BS EN 14399-3 (HR)
- Comparison of Tightening Methods of HSFG Bolts
- Detailed comparison of BS 4395 and BS EN 14399-3 & 6
- Summary comparison of BS 4395 and BS EN 14399-3 & 6
- Guidance notes on the use of Preload Bolt Assemblies
- BS EN 14399 (HSFG) comparison as an alternative to ASTM HSFG
See also:
BS EN 14399-9 Direct Tension Indicators Washers
- Instruction Manual for installing Preloaded (HSFG) bolting with TurnaSure Direct Tension Indicators Washers EN 14399-9
- New Generation Direct Tension Indicators
- Squirter Type DTI performance results
- Preload Measurement and Comparison of Structural Bolts sets installed in Steel Connections with and without DTI
- Tests for stress relaxation over time 1963 to 1971 with CLI
- Fatigue tests on CLI
- CLI Washers-load gap relationship on unloading and loading
- DTI Case History - DTIs Save More than $150,000
- Study discussing influence of load-indicating washers on bolt relaxation in joints subject to high prying forces
- Study on full flattening of Direct Tension Indicators in Shear Connections
- Study on curved protrusion DTIs design assembled without needing nut face or bolt face washers
- Impact of Variable Lubricity on Type 325 Structural DTIs
- Test Report for Accelerated Aging of Weathering Steel Joint using TurnaSure Weathering Steel
- Transverse Vibration Loosening Characteristics of High Strength Fastened Joints using DTIs
Coating
- Trivalent passivation systems (Fasteners+Fixings Magaizne)
- The HDG (Hot Dip Galvanising) Coating (Source: galvanizeit.org)
Mechanical properties
Other
Lindapter
- Type HB Hollo-Bolt Hexagonal Head – Datasheet & Installation Guide
- Type HB Hollo-Bolt Countersunk Head – Datasheet & Installation Guide
- Type HB Hollo-Bolt Flush Fit Head – Datasheet & Installation Guide
- Type LB2 – Lindibolt 2 – Datasheet & Installation Guide
- Type FF FloorFast – Datasheet & Installation Guide
Educational
Shortlink: afast.uk/support