Content with Products

T-Head bolts and nuts assembly Tee-Head bolts and hexagonal nuts in use for Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings Andrews Fasteners Limited together with its partnership factory, manufacturing and distributing T-Head bolts and nuts assemblies for use within the waterworks industry worldwide. We specialise in T-Head bolts in an exclusive range of sizes and finishes. Direct from the factory to the United States of America and Canada, we supply a minimum of 30 full containers of these products to our customers.
Read more about T-Head bolts and nuts assembly ↬

We are offering wide range of Nuts (ISO, DIN and other standards) to various grades and finishes – washers from plain to special type of washers and springs. Our offer includes Product description Specification Hexagon Full Nut, Structural nut, High Nuts, UNC Nuts ISO 4032 DIN 934 DIN 6915 DIN 555 BS 3692 BS EN 14399-3 Hexagon Jam Nut, Lock nut, Half Nut, Thin Nut , Left hand thread nuts DIN 936 DIN 439
Read more about Nuts, Washers, Springs and other components ↬

Self Colour / Black Finish Finish Specification S/C Self Colour Bare / Blackened (Black Oxide) Lightly Oiled products are supplied in a black finish with a light covering of oil Hot Dip Galvanised (HDG) Finish Specification HDG Hot Dip Galvanised EN ISO 10684 EN 1461 BS 7371-6 heavy coating deposits of molten zinc (40-180 microns) suitable for long term corrosion protection; a thicker coating deposit gives a longer life expectancy; it is most suitable for structural steelwork; the coating will affect the thread fit and assembly of fasteners due to the non-uniformity of the coating and the average coating thickness of 50-80 microns; in general the fullnuts are tapped oversize after the plating to allow for this but in some cases the bolt threads are undersize prior to coating; high temperature may affect the metallurgical properties of high tensile metals, i.
Read more about Finished (Plating) ↬

We can offer: Product description Specification U Bolts to drawing Shearstud , Weld studs ISO 13918 DIN 17100, to drawing Wing Bolts, Eye Bolts (Dynamo Eye Bolt), Ring Bolt, Eyelet bolt DIN 580 to drawing Spring dowel to drawings Pin Assemblies to drawing Wire rope grips, bulldog grips BS 462 to drawing Grub Screw DIN 916 Coach Screw, Wood screw DIN 571 DIN 7997 to drawing Throughbolt see our Fixings section Half-round bolts, round bolts, coach bolts, scroll bolts, couplers, countersunk spider bolts, Expamet bolts, Barrel bolts to drawing Hook bolts, Turnbuckle, Beam clamps to drawing Resin Injected Bolts, Rawlok Bolt see our Fixings section Jordahl Tee Bolt see Jordahl website Cotter Split Pin DIN 94
Read more about Special Products ↬

Rail Fixings Type BR Rail Clip Type HD Rail Clip Type HD Spring Rail Clip Type RC Forged Steel Rail Clip For full range of Lindapter product, data sheets and installation instruction please visit Lindapter > Products
Read more about Rail Fixings ↬

Floor Fixings Type GF3030 Type FF Floorfast Type GF Grate-Fast Type 1055 For full range of Lindapter product, data sheets and installation instruction please visit Lindapter > Products
Read more about Floor Fixings ↬

Support fixings Type WF Type SH Type SG Swiftgrip Type LC Type HW/HC Type HCW31 Type HCW30 Type Z10 Type FLS Type FL Type F3 Type F3 BICC Type SW Type HCW34 For full range of Lindapter product, data sheets and installation instruction please visit Lindapter > Products
Read more about Support fixings ↬

Decking Fixings Type AW Alphawedge Type VN V-Nut Type TR60 Type TC Toggle Clamp Supported Decking Profiles Type SD2 Slimdeck 2 Type MW2 Multiwedge 2 Type MF For full range of Lindapter product, data sheets and installation instruction please visit Lindapter > Products
Read more about Decking Fixings ↬

Cavity Fixings Type Countersunk Hollo-Bolt Stainless Steel Hollo-Bolt Type Other Hollo-Bolt HB options Type LB2 Lindibolt 2 Type HB Hollo-Bolt Type Flush Fit Hollo-Bolt For full range of Lindapter product, data sheets and installation instruction please visit Lindapter > Products Lindapter’s popular Hollo-Bolt product has received full seismic approval from the US-based ICC-ES Evaluation report. The ICC-ES Evaluation Report ESR 3330 provides evidence that Lindapter’s expansion bolt for structural steel meets I-code requirements and resists wind loads and seismic loads in design categories A through to F.
Read more about Cavity Fixings ↬

Steelwork Fixings Type W Deep Washer Type A Recessed Type T Type RC Drop Forged Clamp Type P1 & P2 Packings Short Type P1 & P2 Packings Long Type LS Self Adjusting Clamp Type LR Self Adjusting Clamp Type LP4 Type SC Type LP6 Type GC Girder Clamp Type HW/HC Type F9 Flange Clamp Type HD Type HD Spring Type FC Flush Clamp Type D3 Adjustable Clamp Type D2 Adjustable Clamp Type CF High Friction Clamp Type BSNT Flat Top No Tail Type BSLN Long Nose Type BR 8 degree nose Type B Flat Top Type AFW Adapter Washer for High Friction Type AF High Friction Clamp Type AFP High Friction Clamp Packings Type CW Clipped Washer Type AFCW Packing For full range of Lindapter product, data sheets and installation instruction please visit
Read more about Steelwork Fixings ↬